slitaz et Raspberry Pi

Publié le par duteil

SliTaz armhf is a minimal Linux distribution based on SliTaz Linux, that uses the hard-float ABI for the Raspberry Pi. The compressed SD card image is 46M, the rootfs 18.6 MB, and Slitaz uses just about 7 MB RAM after boot.

Slitaz armhf rootfs comes pre-loaded with the following packages:

  • busybox 1.20.2
  • dropbear 2012.55 – Light SSH client and server.
  • nano 2.2.6 – GNU Nano Text Editor.
  • retawq 0.2.6c -  Text mode Web browser.
  • tazpkg 5.0 – SliTaz packages manager (Tiny autonomous zone packages manager).
  • ytree 1.97 – file manager for file and archives.

Slitaz armhf comes with tazpkg package manager which allows to install packages just like you would do with apt-get in Raspbian. There are over 3,300 packages available for Slitaz (x86), and for now, over 250 packages are available for Slitaz armhf.

Let’s get try it out. First, download slitaz-armhf-mini-2012-12-14.zip, extract it, and copy it to an SD card (512 MB or greater) with Win32DiskImager (Windows) or dd (Linux). Insert the SD card in the Raspberry Pi, and within a few seconds the system should boot. From power to login prompt, it takes about 18 seconds, and the kernel takes  3 to 5 seconds of this time.

Dropbear is not running by default, so you’ll have to start it, if you want to login via SSH:

 /etc/init.d/dropbear start 

To start dropbear at boot time, edit /etc/rcS.conf, and add dropbear to RUN_DAEMONS (RUN_DAEMONS=”dropbear”).

Now let’s check the kernel version, as well as disk and memory usage.

Slitaz kernel version, SD card and RAM usage in Raspberry Pi

Maintenant nous allons essayer quelques commmandes avec tazpkg, le gestionnaire de paquets de Slitaz 

 

Pour lister les paquets installés:

 tazpkg list List of all installed packages ================================================================================ busybox 1.20.2 base-system dialog 1.1-20110707 base-system dropbear 2012.55 security ... ytree 1.97 utilities zlib 1.2.7 base-system ================================================================================ 18 packages installed 

Pour lister les paquets sur un mirroir

 
 tazpkg list-mirror 

Finally to install a package (e.g. file utility):

 tazpkg get-install file 

More commands and option are available on tazpkg manpage.

Although Slitaz (x86) is based on LXDE and Openbox, LXDE can’t be installed in Slitaz armhf with tazpkg as the required packages have not been built. However, if some packages are missing,  you can always build them yourself using Slitaz Cookutils. There are 2 main components in Cookutils:

  • Cook lets you compile and create a package, provide a log file and check the receipt/package quality.
  • The Cooker is a build bot with more automation and can be used as a frontend to cook since it provides a CGI/web interface which lets you view cook logs in a nice and colored way.

To get started, you’ll first need to checkout Slitaz Developers Tools and the Cookutils from mercurial repositories:

 sudo apt-get install mercurial hg clone http://hg.slitaz.org/slitaz-dev-tools hg clone http://hg.slitaz.org/cookutils 

For Slitaz armhf, you’ll also need to install Slitaz armhf toolchain, or build it yourself. Alanyih, the developer behind Slitaz arm port, also posted further “instructions” on Slitaz forums.



Read more: http://www.cnx-software.com/2012/12/15/slitaz-armhf-46mb-linux-distribution-for-raspberry-pi/#ixzz2M1dLtSam

Publié dans informatique

Commenter cet article